Xixia Jinfangyuan Sealing Materials Co., Ltd. was established in 2004. It is located in Xixia County Industrial Cluster,Nanyang City, Henan Province.
Xixia Jinfangyuan Sealing Materials Co., Ltd. was established in 2004. It is located in Xixia County Industrial Cluster,Nanyang City, Henan Province.
This packing is braided by special wear-resistant aramid fiber as corner yarns and graphite-filled PTFE yarns, which effectively combines the wear-resistant characteristics of aramid fiber with the self-lubricating and wear-resistant properties of graphite-filled PTFE. It has the characteristics of low friction and high lubrication, and has good stability to strong corrosive media such as acid, alkali and solvent. The good self-lubricating performance of the packing reduces the wear of the seal on the shaft, and aramid fiber can keep the packing with sufficient strength and toughness, and the corrosion resistance of the seal is improved by soaking PTFE emulsion, which is especially suitable for sealing equipment such as ash pumps and slurry pumps.
This packing is braided by special wear-resistant aramid fiber as corner yarns and graphite-filled PTFE yarns, which effectively combines the wear-resistant characteristics of aramid fiber with the self-lubricating and wear-resistant properties of graphite-filled PTFE. It has the characteristics of low friction and high lubrication, and has good stability to strong corrosive media such as acid, alkali and solvent. The good self-lubricating performance of the packing reduces the wear of the seal on the shaft, and aramid fiber can keep the packing with sufficient strength and toughness, and the corrosion resistance of the seal is improved by soaking PTFE emulsion, which is especially suitable for sealing equipment such as ash pumps and slurry pumps.
This packing can be used in multi-particle and high dust working conditions such as ash pump, reactors and slurry pumps.
|
Performance |
Unit |
Indicator |
|
Volume Density |
g/cm³ |
≥ 1.30 |
|
Temperature Tolerance Loss |
% |
≤ 6.0 |
|
Coefficient of Friction |
g |
≤ 0.2 |
|
Abrasion Volume |
g |
≤ 0.5 |
|
Acid Loss(5%H₂SO₄) |
% |
≤ 5.5 |
|
Alkali Loss (25% NaOH) |
% |
≤ 6.5 |
|
Alkali Loss (5% NaOH) |
% |
- |
|
Compression Rate |
% |
≥ 20 |
|
Rebound Rate |
% |
≥ 20 |
|
performance |
parameter |
|
Maximum Temperature |
240℃ |
|
Maximum Linear Velocity |
10m/s |
|
PH Value Range |
4-11 |
|
Pump Pressure |
25kg/cm² |
|
Specification (Side Length of Packing) |
≤ 5.0 |
＞5.0 ≤ 10.0 |
＞10.0 ≤ 16.0 |
＞16.0 ≤ 25.0 |
＞26 |
|
Limit Deviation |
±4.0% |
±4.0% |
±4.0% |
±4.0% |
±5.0% |
