Xixia Jinfangyuan Sealing Materials Co., Ltd. was established in 2004. It is located in Xixia County Industrial Cluster,Nanyang City, Henan Province.
Xixia Jinfangyuan Sealing Materials Co., Ltd. was established in 2004. It is located in Xixia County Industrial Cluster,Nanyang City, Henan Province.
The packing is braided from Nomex fiber (1313) impregnated with special lubricant. During braiding, it is further impregnated with high-quality PTFE emulsion, resulting in a low friction coefficient. It can greatly reduce wear on the shaft even at high rotating speeds. In addition, friction generates little heat, so excessive temperature will not occur between the packing rings and the shaft. The packing remains low-temperature, soft and flexible during operation, thus extending its service life.
The packing is braided from Nomex fiber (1313) impregnated with special lubricant. During braiding, it is further impregnated with high-quality PTFE emulsion, resulting in a low friction coefficient. It can greatly reduce wear on the shaft even at high rotating speeds. In addition, friction generates little heat, so excessive temperature will not occur between the packing rings and the shaft. The packing remains low-temperature, soft and flexible during operation, thus extending its service life.
High-performance and multi-purpose general packing for pumps and valves. Suitable for abrasive working conditions with solid particles, such as ash pumps, reactors and slurry pumps (cooling and flushing are recommended). It is also applicable to various media in different processing industries, including water, sewage, steam, solvents, chemicals, acids and corrosive solutions. Suitable for general applications requiring high mechanical properties of packing.
|
Performance |
Unit |
Index |
|
Volume Density |
g/cm³ |
≥ 1.30 |
|
Heat Resistance Loss |
% |
≤ 6.0 |
|
Coefficient of Friction |
— |
≤ 0.15 |
|
Abrasion Volume |
g |
≤ 0.05 |
|
Acid Resistance (5% H₂SO₄) |
% |
≤ 5.5 |
|
Alkali Loss (25% NaOH) |
% |
≤ 6.5 |
|
Compression Rate |
% |
≥ 20 |
|
Rebound Rate |
% |
≥ 20 |
|
Item |
Parameter |
|
Max. Temperature |
240℃ |
|
Max. Linear Velocity |
10 m/s |
|
PH Range |
2 – 12 |
|
Pressure for Pumps |
20 kg/cm² |
|
Pressure for Valves |
200 kg/cm² |
|
Specification (Side Length, mm) |
3.0 |
4.0 |
5.0 |
6.0 |
8.0 |
10.0 |
12.0 |
14.0 |
16.0 |
18.0 |
20.0 |
22.0 |
25.0 |
|
Limit Deviation |
±0.2 |
±0.3 |
±0.5 |
±0.6 |
±0.8 |
||||||||
